Aiphone GT-202HB, Surface Mounting Box With Hood

Aiphone GT-202HB, Surface Mounting Box With Hood

Designed for 4 GT modules, requires 2 x GF2F

Features:

• Vandal resistant surface mount box for the GT Series entrance panel

Firstly, this system is constructed using 2 wires for audio and 2 wires for video and requires minimal work for installation.

A maximum of 6 video trunk lines can be used from the video bus controller and audio signal lines use a distribution point from the bus controller. Audio systems can also be configured.

For wiring from the control units to each residence/tenant, GT-4Z wiring method, loop wiring method, or GT-1Z wiring method is possible.

Mounting (Aiphone GT-202HB):

Firstly, for video entrance stations and video door stations, the picture quality of the residential/tenant station monitor is affected by the external light surrounding the built-in camera.

Secondly, Do not install these stations in the types of locations shown below.

• Locations exposed to direct sunlight
• Locations under street lights or door lights
• Other locations exposed to strong light
• Entrance stations (all-in-one type) include a sensor. Do not place objects such as plants or trees in places monitored by the sensor. Also, placing the unit in bright sunlit areas may prevent the sensor from working properly.